MyPhoneRiches
 
Home » Tag: etc

 

How To Disassemble And Clean A Revolver Firearm In 60 Minutes

The revolver is an American classic dating back centuries ago and getting its rise to fame in the 1800’s thanks to Samuel Colt. Revolvers have hard to reach places due to their design, making them a little more difficult to clean than a modern handgun.

You need the right tools of the trade to clean a revolver. You could get by with a toothbrush, a rag, and the right solvent but the process is more effective and quick if you get a gun cleaning kit. Gun cleaning kits will run for $20 for a starter kit, but you can spend up to $60 and up for a kit with a nice case. Skip the cheap kits: spend at least $20 so you don’t get subpar solvent and materials. You will be using your kit for years to come so make sure it’s a good one.

Safety always comes first: make sure the revolver doesn’t have live rounds in it before attempting to clean it. Any firing mechanisms may also be disabled for further safety. Begin the cleaning process by removing the cylinder and prepare to use the bore cleaning tool. Optionally, you may tie a rag around rear cylinder opening so that you won’t touch anything except the bore in this step.

The most simple way to clean a revolver that is moderately tainted is two get three separate patches. With the first, dip it in the solvent and go over the revolver well enough that you are in every nook and cranny. Use the second patch to get most of the solvent off and get any remaining residue. The third patch should take off any excess solvent. If you have more grime on the third patch, repeat the process.

Use your brush to clean the cylinder of the firearm. Your brush should be specifically created for the measurements of your revolver so you won’t have to do any extra work in getting the hard to reach spots. If you don’t have your cleaning kit brush handy, the best makeshift tool is a toothbrush. Use a medium bristle if possible so you can get a firm cleaning.

To this point, the cleaning process is something you do after ever session with your revolver. If you haven’t taken your firearm completely apart and cleaned every part in a long time, it’s probably best you do so. Grime does build up in hard to reach places and it can cause serious safety risks if allowed to continue. Look at your revolver manual to see how to properly disassemble it for cleaning.

Closing Comments

Cleaning a revolver is simple. Much more so than cleaning some modern rifles and handguns. However, you shouldn’t skimp over the process and go through it quickly. Take your time and clean your revolver with care so that you can continue to enjoy your investment in your firearm and hobby.

If you’re having problems cleaning the hard to reach places, such as your boresight, you should look into getting a cleaning kit. Odds are you won’t spend over twenty bucks for a gun cleaning kit so it won’t break the bank.

Chris Channing 17 September 2011 General , , , , , , , , , No Comments

How To Get HTTP Request Information In Zend Framework

Zend Framework is a popular web development language based on PHP. It allows developers to quickly access vital information on environment variables and HTTP request information at all parts of the application.

There are few scenarios where using a singleton design pattern is deemed acceptable. Zend Framework uses it as a pattern for the front controller, and it works great for accessing request information from anywhere in the application. The reason most developers don’t use this pattern is because it may be abused, so be careful not to call the front controller where it shouldn’t be. A good example is with using logic code in the view: this goes against MVC principle.

If you do intend on getting URL parameters in a view, you have two options. The easiest is to use a view helper. The Server Url view helper allows developers to quickly access the current URL and URI. Other information can be accessed by passing the variables from your controller to your view. While technically you can still access the front controller, it goes against the entire design of Zend Framework to do so.

When in the controller a developer may access methods of the HTTP request object directly. Every controller in Zend will give access to methods for finding parameters, domains, paths, and schemes of URI information. This is where user interface elements such as bread crumbs may be easily created and passed to the view while still following the MVC principle. It may take more lines of code than the Server Url view helper, but controllers give developers access to more options.

The controller makes it easy to access the HTTP request because it extends a class that contains the request object. Library files will more than likely not do the same: you will have to create a new instance of the Zend Front Controller to get the information. As talked about earlier, this object is a singleton so you are able to access it anywhere at all. While very useful, this type of power should be used accordingly.

The base URL helper is another option for those who don’t want to build the root path every time they need to build a link. The base URL helper is set in the application configuration file or in the bootstrap. There are several implementations of this functionality, so use what best works for your application. This is as close to a singleton object as you should get to making your own global helper file.

Closing Comments

Built on PHP, it’s natural that Zend Framework offers everything that PHP does in regards to getting URI information. The only difference is that Zend Framework makes it easier to access these objects and also does so in a consistent manner. Just remember to use the proper methods of accessing the information so you don’t violate the Zend Framework rule set.

This Zend Framework tutorial was written by Chris Channing. See more of his development and thoughts on zend get current url parameters.

Chris Channing 29 August 2011 General , , , , , , , , , , No Comments

Materials That Recycling Containers Are Developed With

Recycling on a large level, such as a city or school, is much different than recycling at home or at the office. There are many types of materials, shapes, and sizes to pick from when buying a container. Most often your search will begin looking for a material that best suits the needs you require- whether it be durability or just extra space.

The most popular material would be one of the basics: stainless steel, plastic, or even wood if it’s an outside bin. You can’t go wrong with the classics, but some of the major qualms would include that some of these materials don’t degrade easily, and others such as wood don’t work well for inside the home.

Recycled materials are a popular fad for recycling containers. They may cost more because of the extra work in constructing them, but the recycling fanatics are more than willing to pay a higher fee for supporting the recycling cause at every level. Sometimes these recycled containers are made of recycled plastic – which isn’t very degradable but it does ensure that new plastic isn’t put into production and rather recycles current supplies.

Fiberglass is the up and coming contender in materials. Being lightweight and looking great, it’s a great material for both households and organizations. The material is very durable and sometimes even flame retardant, so it’s a natural choice for cities, schools, and businesses. There is no pollution concern with fiberglass and can be recycled to be used in asphalt pavement or in other applications.

Durability plays a large role in which materials may be used in which situations. Wooden recycling bins, composting containers, and other storage bins are usually only used in the home environment. Wood degrades too easily over time and can easily be damaged. Other possibilities such as straight plastic can be flimsy and be easily melted in case of fire. Steel and fiberglass have remained favorites of city officials everywhere.

The trendy cities in the United States have begun recycling programs. Home owners won’t even need a recycling container, lest they actually want one. Instead, the city hands out vouchers for recycling bags that the trash pickup crew sort away from regular trash. If your city doesn’t have a program like this you can also just use a cloth bag to store your recycled materials in: a quick and cheap solution.

In Conclusion

The innovation in recycling container materials is still on the move. While we wait to see more mixtures and compounds of materials, it’s important that you find out what your opportunities are in helping the recycling movement. Talk to your local government about getting a program setup and raise awareness.

It’s great to see so many people interested in recycling and recycling bins. Show your support and help spread the word for a better environment!

Chris Channing 13 May 2011 General , , , , , , , , No Comments

Payday Loans And How To Use Them For Temporary Debts

Temporary loans are a big market; unfortunately, they can sometimes be used to manipulate those who use them. The only way to stay out of debt when using payday loans is to realize what the risks of using them are. In addition, borrowers must known how to be financially responsible before using them.

Don’t expect the term of a payday loan to be long: you often must repay it by the time you get your next check. This is a double edged sword for sure: you aren’t plagued by long term debt, but at the same time you better hope you can pay it off as quick as you are instructed. If not, you could quickly slip into a cycle of debt that has become common in America.

Knowing when to get a payday loan is half the battle. Getting the next video game console for Christmas: probably a bad idea with a payday loan. If you have a flat tire and need it fixed to get to work, this is a much better application for a payday loan. The principle of only using loans for things you need is necessary. Otherwise, you would quickly find yourself in debt and paying high interest rates for no reason.

Make sure you can actually pay the loan off with your next paycheck. If you can’t, you have to look at the bigger picture: your finances aren’t in order and you have to take different action. This may even mean declaring bankruptcy, but might be more simple than that: talk to a financial adviser. Even small budgets can run entire families, you just have to know the rules to follow.

Banks don’t really enjoy giving out small loans, which is what birthed the payday loan market. If the loan you intend on taking out is more than $500, definitely start looking at actual banks to get the loan from. Their rates are likely to be lower, based on your credit history. If you have poor credit then your only last resort might be the payday loan after all.

The contract signed between the payday loan facility and you is important. They might try to rush you so that you don’t see any hidden fees or agreements. Take as much time as you need or want to spend: don’t sign until you know what you are getting into. It sounds simple on paper, but when special clauses are hidden by the lender, you might find yourself paying more than you thought possible.

Final Thoughts

The dangers of payday loans are well deserved. Just don’t fall victim to the common pitfalls that many Americans do each year. Payday loans are perfectly safe so long as you know how to use them. Financial responsibility is important to keep yourself out of the potential debt and hardships that could arise.

Alan Edsboro writes on finance topics to recognize helpful resources such as AllBanks. Read more about loan calculator topics to start getting your own finances in order as soon as possible.

Chris Channing 6 December 2010 General , , , , , , , , , , , No Comments

School Bus Accidents And Involved Legal Disputes

Public school is a great service to the citizens of the United States. That isn’t to say that it isn’t perfect, and that accidents can’t or won’t happen. Schools can err in their policies, hiring process, and so forth- and without precautions, your child could be in danger as a result.

The school board is in charge of enacting policies of finding experienced bus drivers. Sometimes the bus driver they hire may not be the perfect fit, due to low wages that bus drivers commonly make. You can get a quick look at the bus driver and have a brief conversation to see what he or she is like. Follow up on the initial meeting by asking for the background of the bus driver from the school.

School bus accidents can be prevented by keeping children aware of how to act on a bus. A bus driver should already have taught kids how to act- and rules are usually posted at the front of the bus. Go over the rules again with your child, stressing that staying in the seat and not causing distractions is ideal.

The school won’t want to pay the bill of injuries sustained from a school bus accident. Public schools are on a tight budget as it is, and paying out medical bills to families can certainly put them in the red. For this reason, parents need to consult a lawyer to see what their possible solutions are directly after the accident has occurred.

Research a school’s history with school bus accidents and how they handled the situation. A school board that was slow to act on solving the problem that caused the accident should not be one that is entrusted with the safety of your child. If you don’t have other choices for private or public schools, you can always make arrangements to take the child to school yourself or have a family member do it.

Lawyers know the specifics about school bus accidents, how they work, and what compensation is involved. Don’t sit through months or a couple years of lawsuit cat and mouse games. Lawyers can help get quick verdicts, or even get a cash advance to cover any medical bills the child endured, including therapy with professionals that help talk children through the accident. Don’t settle for less when it comes to the safety of your child.

Closing Comments

It’s easy to find a lawyer, but less easy to find one that has had experience in child safety, negligence, or school board cases. Search the Internet for several possibilities, and call a few up for a quote and details on their history with cases that pertain to your own.

Learn more on best St. Louis lawyers and Missouri medical malpractice settlements.

Chris Channing 30 August 2010 General , , , , , , , , No Comments

The Process Of Pasteurizing Milk And Other Edibles

We can enjoy the great taste of fresh milk thanks to technologies such as pasteurization. The technology is one still in use today, although founded about two centuries ago by a man known as Louis Pasteur. It alone has developed the food industry as it is apparent today.

One caveat with pasteurization is that the process actually takes some of the taste out of the item being sterilized. Because the liquid is being heated to hot temperatures and brought down again, the taste is disrupted. This is why milk that is fresh from the farm, and organic, may taste a bit better than the standard carton of milk from the grocery store.

Nutrients that are in milk are great for growing children. There are helpful vitamins, enzymes, and other ingredients that growing children need for healthy bodies. Pasteurization takes out some of the benefits thanks to the heating process. Some companies will put fortified nutrients back into the milk to make up for the degraded quality, although this will cost more to the consumer.

New types of packaging are the new “buzz” in the milk industry. Pasteurization has its place as a helpful process in making the milk safe, while the packaging ensures that the milk stays edible for months to come. This type of packaging has been dubbed aseptic packaging. It’s what you might see apple juice or small cartons of chocolate milk in- kind of like a cardboard box mixed with plastic wrap.

The amount of items that the pasteurization process applies to is vast. One would be narrow minded to assume that milk was the only industry that pasteurization serves. There are plenty of liquids, from soy sauce to marinade sauces, and also foods that you might not even think get sterilized. Foods would include crab, cheese, and some nuts. It extends the shelf life of each product dramatically, and with new packaging producers can keep food better for longer periods of time.

Some side with the act of homogenization. This process is the counter process to pasteurization. In homogenization, the mixture of milk is blended so finely that all parts of the milk are equal. This means that the fats and molecules are all compressed and mixed into one solid mixture. Those who side with pasteurization claim that this process makes for one that removes much of the nutritional content. It also detracts from the overall taste of the milk.

Final Thoughts

Heavy machinery and small machinery alike achieve pasteurization. Finding either will be a tough process, however. Start looking on the Internet for brokers who can help out, start going to local auctions, or buy new from a manufacturer to get started in pasteurization.

Learn more on tunnel pasteurizer and flash pasteurizer.

Chris Channing 27 July 2010 General , , , , , , , , No Comments

The Appeal Of True Religion Brand Jeans For Americans

Fashionable jeans for men almost don’t exist. Men can’t be bothered to pick and choose fashions when they primarily need rugged jeans that can do anything. True Religion jeans are different- allowing men to have strong denim jeans, but also follow fashion trends with each purchase.

True Religion jeans use a material called denim. Denim was hailed as a revolutionary material in making jeans that could withstand the tests of the man’s work day. Denim is what True Religion uses in their jean collections. It’s also the reason why these jeans are so durable. True Religion has found a way to make them fashionable in the process.

The average guy that has a long work day doing physical activity couldn’t care less about fashion. This is where women come in! Wives and girlfriends that want their significant other to look great, but still have jeans that won’t rip or tear under pressure, should recommend the True Religion brand. It might cost a hundred dollars or more for each pair- so make the case a good one.

Skinny is a line of jeans that True Religion has created. Skinny features jeans that are tighter on the legs, ankles, and hip. Men who like to look good and make the women ogle over them will definitely go for these first. The skinny jeans go well with V-neck tee shirts, other True Religion apparel, and accessories that the store offers. Skinny jeans will make the “wow” factor possible.

Shorts are another item that men can buy in the True Religion catalog. The only downside is that the company doesn’t put as much attention in their shorts category as they do the jean pants. You will only find several lines of shorts in the catalog, but it should be enough to make it through the Summer. Shorts are just as expensive as the jeans, often $150 and up for an official pair from the True Religion store.

Like any major fashion store, True Religion has a popular line of accessories. These include jewelry, shoes, hats, fragrances, and socks. Accessories are great for those who like the True Religion brand, but don’t have the money to commit to the high retail costs. It’s also a way for die-hard fans to show off their appreciation of the rugged jeans. The fragrance is of special interest, as it is rated as one of the best-smelling fragrances in its class.

Final Thoughts

If you can’t be bothered to pay several hundred dollars per pair of jeans, there are ways to get the True Religion products at a lesser price. Whether buying wholesale, used, or just finding discounts- those who seek price cuts will inevitably find them and save a heap of money in the process.

Learn more on Cheap True Religion and Wholesale True Religion.

Chris Channing 17 July 2010 General , , , , , , , , , , , No Comments

Types Of Mens Accessories Offered By Ed Hardy Stores

Accessories that come straight from the Ed Hardy retail store are something to be desired for men everywhere. Their lines of watches, ties, belts, sunglasses, and more are considered to be top of the line in fashion and comfort. Ed Hardy also has fairly acceptable prices for their men’s collection.

The typical Ed Hardy tie will cost about $30, which is about normal for upper class ties. Ed Hardy realizes that not every formal occasion will allow outlandish prints and symbols, so it has separate lines for corporate events and casual events. The corporate ties feature the Ed Hardy prints made famous by their apparel line, as well as the Ed Hardy logo.

Women go crazy over sunglasses, while men seem to be less excited- but we all still enjoy a nice pair of shades. Ed Hardy sunglasses for young men and adults have special prints on the frame to show who it was made by. Ed Hardy likes to brand the frame, but also likes to create their own frame style with bold and wide shapes. Sunglasses will start at around a couple hundred dollars.

Men don’t typically carry handbags around. Ed Hardy still does offer some bags, but in the form of laptop and backpack bags. Expect to pay a litter over $100 for either product. The Smith Tiger Technical Laptop bag is especially nice, as it allows techies to store all of their equipment in addition to the laptop. Both products have a tiger as the bag mascot.

The EH watches are vivid in color. The standard expensive watch costs so much because they are precise, usually have precious metals, and are not your average watch. The Ed Hardy watches are expensive for the same reasons, only they tend to have neon colors or vibrant mascots and symbols. For those wanting a more corporate feel, the Tiger Stellar Stainless Steel Watch is an example of how Ed Hardy can release a corporate watch with style.

Skaters are known for their liking of wristbands. Skaters will be glad to know that these accessories are endorsed by Ed Hardy, but do cost nearly $50 each. The designs are colorful and commonly feature skulls, holes, tigers, or other extreme designs. Each wristband is made of fine leather and may include some metallic pieces as decoration. Studded wristbands will cost more, but have a more impressive look when worn.

Closing Comments

Ed Hardy is a great place to find accessories for guys. They have so much great stuff in different styles and colors that it’s almost guaranteed no one else will have the same gear. If interested in Ed Hardy accessories check out a local retailer at the mall or buy online.

Learn more on Cheap True Religion and Wholesale Ed Hardy.

Chris Channing 17 July 2010 General , , , , , , , , No Comments

Once Upon The Juicy Couture Company History

The Tale of the Juicy Couture company history starts in 1994 when co-designers Gela Nash-Taylor, and Pamela Skaist-Levy started a clothing line called Travis Jeans. The fashion line achieved success concentrating on paternity jeans that were comfy and stylish.

In 1996 the girls changed the direction of the fashion line. They dropped the jeans in an effort to create a more femininely flattering design, and started the Juicy Couture line. They had wanted to create a line that was both sexy & stylish, but comfortable as well.

The 2 initially began the fashion brand at their house in Pacoima, California. Working to place the line in the public eyesight Juicy girls made the decision to offer their original designs to the stars of Hollywood, such as Madonna, Cameron Diaz and J Lo. It didn’t take long for someone to recognized their talent; Madonna was seen wearing one of their low riding draw string pants, and form fitting zip hoodies with the word “Madge” stitched into it. The scene began practically immediate success for their business. Before long, Hollywood was bursting with star studded Juicy Couture. Madonna’s ensemble was called the “Tracksuit”, and it ultimately turn out to be the line’s most famed design. The phrase “Madge” barely ever shows up on Juicy Couture attire any longer. The outfits have the signature slogan “Juicy” on the rear end of every pair of bottoms.

With the desire to extend the Juicy Couture line to the east coast, the Juicy girls held an east coast debut party to launch a new line. The affair was a hit; soon after Juicy Couture established a successful store in New York.

In 1999, Juicy Couture introduced a line of jeans called Juicy Jeans. In 2001, they reintroduced the tracksuit to the fashion world. The suits are designed to accentuate a woman’s curves and made of soft feminine fabrics such as velour, terry cloth, fleece, or cashmere.

In 2002, Juicy Couture expanded their clothing line to Men, Children, & even dogs. Doggy products included, carriers, dog beds, toys, leashes, clothing and collars.

Gela and Pamela sold Travis Jeans to Liz Claiborne in 2003 for the hefty fee of $53 million dollars in addition to a percentage of the future profits. To this day Gela and Pamela remain presidents of the company and continue to have control over the design concepts.

With aid from Liz Claiborne, In 2004 The Company became a world known brand. Juicy Couture expanded their woman’s products introducing lines of handbags, jewelry, swim wear, shoes, perfume and cologne. Today the company continues to offer the most fashionable and comfortable clothing in the industry.

Learn more on cheap Abercrombie and wholesale Ed hardy.

Chris Channing 3 June 2010 General , , , , , , , , , , , No Comments

The Facts About Sterling Silver Jewelery Purchase Tips

Sterling is a name used to describe an alloy. When the English economy began, sterling was used as its money. Sterling gets its name from a silver coin that was given to the English by the Easterlings in order to pay for the livestock and grain they needed to buy. The English liked the coin, realized its worth, and it then became their regular currency. Continue reading for the inside story regarding sterling silver jewelery purchase tips.

For any piece to be tagged as such, it has to be at least ninety two and one half percent silver by its weight and have no designation for the remainder. The reasoning behind less than one hundred percent silver is because the product would be too soft to use for many necessary items. Most often, copper is the element that is used to make up the remaining percentage because it has good wear traits.

If you intend to pay a higher price for it, you need to verify that the silver content of the finished item you intend to purchase. High grade producers will begin the process with a little more to ensure that the end result is the appropriate weight, due to loss during dispensation.

Silver is not only gorgeous, but it can be quite inexpensive. We now have some of the specifics about sterling silver, so let us figure out the right places to go shopping. As always, the best place to start is online.

Do not have it fixed in your mind that silver is only in the form of jewelery. It comes in a variety of products, and antique collectors and brokers are out there in massive quantities. Though it may not have the same value as gold, it is an investment. Silver can be an heirloom.

If you want to find a piece of silver jewelery or a jewelery store online, there are a wide variety. As stated above, there are online brokers who specialize in antiques, and there are stores online for silver tableware also. There will be no problem finding all of these things online at wholesale prices either. There is a huge list of wholesalers.

You now know what you need to be aware of when purchasing silver, so get out there and shop. Find some special piece to decorate your dining room, or a perfect piece of jewelery to wear on a special occasion. Encourage someone else to learn about sterling silver jewelery purchase tips.

Learn more on religious sterling silver jewelry and Christian jewelry.

Chris Channing 19 May 2010 General , , , , , , , , , No Comments
Page 1 of 212»